Specifications - Snap-On 870968 Manual De Instrucciones Para La Instalación, Uso Y Mantenimiento

Problem
Detergent Leak from inside the
unit or won't hold detergent
Leaking Oil from Pump
Leaking water from
bottom of unit
Spray wand leaks
Detergent Tank fills up with
water
MAXIMUM PRESSURE
MAX WATER FLOW
VOLTAGE
CURRENT
DETERGENT TANK
ELECTRICAL CORD
PRESSURE HOSE
INLET WATER PRESSURE
*Meets PWMA-PW101 test requirement.
TROUBLESHOOTING GUIDE
Probable Cause
1. Disconnected or Kinked
Detergent Pick up Tube.
2. Chemical Tank Nipple
Broken.
1. A small amount of leakage
is normal.
1. Machine Inlet
connection is
defective.
1. Spray wand is not proper-
ly attached.
1. Detergent Suction
Assembly is defective.

SPECIFICATIONS

1750 PSI* / 120.6 bar
1.2 GPM* / 4.5 LPM
120V / 60HZ
12A
0.8 LITER / 0.21 GAL
35 FT. / 10.6 M
25 FT. / 7.6 m
40-60 PSI
22
Solution
1. Call Customer Service:
1-888-278-8092.
2. Call Customer Service:
1-888-278-8092.
1. If leakage persists, Call
Customer Service:
1-888-278-8092.
1. Check the Machine Inlet
at the front of the unit to
ensure that water is not
leaking from it. If the con-
nection is leaking, it will
have to be replaced. Call
Customer Service: 1-888-
278-8092.
1. See instructions.
1. Call Customer Service:
1-888-278-8092.