Snap-On 870968 Manual De Instrucciones Para La Instalación, Uso Y Mantenimiento página 5

In addition to SAFETY ALERTS listed above, there could also be numerous symbols alerting
the operator that specific safety measures are required to safely operate this tool. Learn these
SAFETY SYMBOLS as well as the SAFETY ALERTS to prevent injury to the operator and
to bystanders.
READ OPERATING INSTRUCTIONS: Read and understand tool labels, safety
warnings and precautions in this manual before operating the tool. Failure to
follow WARNINGS could result in serious injury or even death to the operator or
bystanders.
ELECTRICAL SHOCK: This tool produces hazardous electrical voltage. Read
and become familiar with this manual's WARNINGS and CAUTIONS so that it is
installed and used properly.
WEAR APPROVED EYE PROTECTION: Spray can splash back or propel
objects, including incorrectly attached accessories. Always wear approved eye
protection. Safety glasses must conform to the requirements of American National
Standards Institute (ANSI) Z87.1 and provide protection against flying particles
from both front and side.
INJECTION HAZARD: Pressure washers can produce fluid streams severe
enough to penetrate animal and human flesh.
SLIPPING and FALLING: Pressure washers produce puddles of slippery liquid
that can result in falls. Kickback from spray wand can result in falls when using
unstable platforms.
CAUTION indicates
situation which, if not avoided, may result in minor or
moderate injury.
CAUTION used without the safety alert symbol indicates
a potentially hazardous situation which, if not avoided,
may result in property damage.
NOTE provides additional information that is useful for
proper use and maintenance of this tool. If a NOTE is indicat-
ed, make sure it is fully understood.
a potentially
3
hazardous