Before first use
NOTE
►
This appliance is supplied with non-charged
batteries. The batteries must be charged for
6 hours before the first use.
■
Remove all packaging materials and protective
stickers from the appliance, especially the pro-
tective sticker on the contacts on the back of the
hand element
.
■
Place the cradle
cradle
clicks into place.
Charging the appliance
NOTE
►
Ensure that the appliance is switched off
before starting to charge the batteries.
■
To charge the appliance, connect the charger
to a mains socket and insert the barrel jack
into the charging socket
Feed the cable through the cable channel on the
charging socket
resting on the cable.
■
Place the handle with the attached hand ele-
ment
onto the cradle
The charge indicator lamp
–
for the model in
anthracite/green:
When the appliance is fully charged, the
charge indicator lamp
–
for the model in
anthracite/red:
When the appliance is fully charged, the
charge indicator lamp
■
30
│
GB │ MT
on the stand so that the
on the cradle
, so that the cradle
.
lights up red.
lights up green.
lights up orange.
Assembly/disassembly
Connecting the hand element to the
handle/removal from handle
.
is not
Fig. 1
■
To connect the hand element
push the tip of the hand element
opening in the hand element recess
■
Then press the grip
into the handle so that the hand element
clicks firmly into position (Fig. 1).
■
To remove the hand element
press the "Hand element" release
■
Then pull the hand element
forwards out of the hand element recess
(Fig. 2).
Fig. 2
to the handle,
into the
.
of the hand element
from the handle,
.
upwards and
SHSS 12 C2