Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. CONTENT &
HIGHLIGHTS
The ceiling stand for LCD or LED screens is designed to hold screens from
42" and up to 60" and standing the weight without deformation and always
maintaining the screen at the selected position. It can be tilted up to 15° and can
rotate to the left or right at an 90° angle for better adjustment and vision.
It is ideal for schools, offi ces, hotels, conference rooms and any house ceiling.
It is made of low carbon steel with black paint, includes necessary screws and
fi ttings to assemble and fi x.
- For LCD and LED displays.
- Supports up to 60" screens.
IMPORTANT
•
The bracket should be installed on ceiling to withstand
earthquakes or prolonged periods of vibration.
•
During assembly, use only the parts supplied and attach
them fi rmly.
•
Do not miss any piece during assembly. Install all parts
as directed.
•
Do not alter or modify any parts.
•
Take special care when installing on the ceiling because
of its weight.
•
When installed in the ceiling be sure to use proper
anchors.
•
Install with at least two people.
•
Choose a clear spot on the ceiling to fi x the display
securely.
•
Place a protective cover on the surface it will work while
handling the plasma display and support unit in the wall.
•
After installation, make sure the unit is fi rmly attached.
•
During installation, leave at least 15 cm free around the
screen.
•
If you don´t leave enough space, the display could
overheat, which can cause fi re or damage to the unit.
3
Publicidad
Tabla de contenido
