GE UXADJB36PSS Instrucciones De Instalación página 2

UXADJB36PSS, UXADJB48PSS Accessory Installation
INSTALL COVER PANELS
See alternate method if side access is blocked.
■ H old the bottom cover over the bottom support
while driving one screw (provided) into each side.
■ P lace the top cover with shelf over the top wall
support. If you have access to the sides, secure the
panel with two screws on each side.
■ S ecure the top cover with shelf to the top support
with screws through the front of the panel, at the top
corners. Use one screw on each side.
Install
Screw
Install Corner Screws
2
Install
Screw
Cover Panel
INSTALL COVER PANELS (cont.)
ALTERNATE METHOD: When side access is blocked
■ I nstall bottom cover over the bottom support while
driving one screw into each side.
■ H old top cover in place while marking screw locations,
just below shelf support and onto bottom cover.
■ R emove the shelf and drill a 9/64" diameter hole in
the pencil-marked locations.
■ M ount the top cover over the top support and
secure the front cover with screws through the
drilled holes on each side.
■ I nstall screws through each top corner.
Install Screw
on Each Side
Install Screw in Top Corner on Each Side
Mark Screw
Locations for
Alternate Method
Shelf
31-10692-1