New Oil Injection - MasterCool 69789 Instrucciones Para El Uso

NOTE: The oil phase is disabled in case of hybrid vehicles.
Enter the vacuum time and press F4 ↵.
The following screen will be displayed:
Open the high- and low-pressure taps of the machine and press F1 ▶.

NEW OIL INJECTION

This operation can be carried out ONLY following a vacuum operation and before charging. From the ASSISTED PROCEDURE, scroll down with DOWN
ARROW ↓, select "Oil":
*The OIL phase is disabled in case of hybrid vehicles.
Press F4 ↵ to confirm, a pop-up window with oil settings will be displayed.
Enter the amount of oil, then press F4 ↵.
ASSISTED PROCEDURE
Recovery/Recycling
■
Vacuum
Oil
Ref Charge
Vacuum
■
Gas Filling
VACUUM
▶
Vacuum
■
Open high and low
service port valves
F1: to continue
F2: exit
■
VACUUM
Time Left
HEATER*
ACp = >26 inhg
Tp = 86 psi
■
ASSISTED PROCEDURE
Recovery/Recycling
Vacuum*
Oil*
Ref Charge
Oil
Hybrid Vehicle
■
Gas Filling
↵
↑
↓
xx.xxlb
↵
20 min
↑
↓
xxg
20min
20min
↵
↑
↓
xx.xxlb
↵
0 cc
↑
↓
xxg
21