Connection; Configuration - Virax 271000 Manual De Utilización

CONNECTION

Configuration

Configuration of the connection
This stage is only required once for each USB port on the PC.
AFTER HAVING OPENED THE MANAGEMENT SOFTWARE:
Connect the device to an available USB port on the PC.
Select USB in the "Communication" tab
Run "Update".
If communication is not possible, open the following in Windows:
Configuration panel / System / Peripheral hardware.
Extend the port tree structure (COM and LPT)
Identify the number of the com port under the name CO
DETECTOR CDC.
Select "COM port" in the "Communication" tab
Indicate the number of the above com port and confirm.
If Windows requires the installation of a driver, select "install from a specific location or
list" and browse to the directory "DRIVERS" at the installation location selected for the
management software. (Default location: C:\Virax\AdminCO)
The content of this document may be modified without prior notice 57