Warming Up
After the engine starts, move the throttle lever on
the equipment to halfway between "FAST" and
"SLOW".
To warm up the engine, run it for 3 to 5 minutes
with the throttle lever in the same load position
(halfway) before putting the equipment under load.
Then, move the throttle lever on the equipment to its
"FAST" position.
A
A. Throttle Lever
OPERATING
Allow engine to warm up sufficiently (3 to 5
minutes at idle) before applying a load. This
will allow oil to reach all engine parts, and
allow piston clearance to reach design
specifications.
While warming up the engine, make sure the
warning light (oil pressure) on dash is not
on. The warning light must not be illuminated
during engine operation (if equipped).
OPERATING 19
NOTICE
NOTICE