Operating; Warming Up; Engine Inclination - Kawasaki FS730V - EFI Manual Del Propietário

18 OPERATING

Warming Up

To warm up the engine, run it for 3 to 5 minutes
with the throttle lever in the "SLOW" speed position.
Then move the throttle lever on the equipment to its
"FAST" speed position before putting the equipment
under load.
NOTICE
Allow engine to warm up sufficiently (3 to
5 minutes at idle) before applying a load.
This will allow oil to reach all engine parts,
and allow piston clearance to reach design
specifications.
NOTICE
While warming up the engine, make sure the
warning light (oil pressure) on dash is not
on. The warning light must not be illuminated
during engine operation (if equipped).
OPERATING

Engine Inclination

This engine will operate continuously at angles up
to 25° in any direction.
Refer to the operating instructions of the equipment
this engine powers. Because of equipment design or
application, there may be more stringent restrictions
regarding the angle of operation.
Do not operate this engine continuously
at angles exceeding 25° in any direction.
Engine damage could result from insufficient
lubrication.
NOTICE