Silvercrest SRK 400 A2 Instrucciones De Uso página 65

NOTE
► Always prepare at least enough rice so that the when the water is added it
reaches at least the CUP marking "2" . Failure to do so could lead to poor
cooking results!
4) Place the cooking bowl w in the appliance:
Ensure that ...
–
... there is no moisture or rice on the outside of the cooking bowl w –
this will prevent soiling of the cooking area . If necessary, wipe the outside
with a clean cloth .
–
... the cooking bowl w is not skewed or tilted when being placed in the
rice cooker housing . Always insert the cooking bowl w correctly and
precisely into the rice cooker housing . Otherwise, the safety shut-off of
the appliance may trigger and the appliance will not allow itself to be
switched on .
5) Now close the lid .
6) Connect the power cable 5 to the socket 8 and insert the mains plug into
the power socket .
7) Switch the appliance on using the On/Off switch 0 . The orange control
lamp "
8) Press down the function selector switch 7 and cook the rice for the amount
of time specified on the rice packet .
9) When the rice is ready:
–
If you want to eat the rice immediately, disconnect the plug from the
mains power socket .
–
If you wish to keep the rice warm (max . 2 hours), press the function
selector switch 7 upwards .
10) When you have removed the rice, switch the device off at the On/Off switch 0
and pull the power plug out of the mains power socket .
NOTE
► Some types of easy-cook rice still have to swell after cooking .
Always follow the preparation instructions on the packaging of the rice .
CAUTION! PROPERTY DAMAGE!
► Use only the supplied plastic spoon r to remove the rice . Other spoons
may cause damage to the anti-stick coating of the cooking bowl w .
NOTE
► You can insert the plastic spoon r into the bracket q at the edge of the
rice cooker . This is always ready to hand!
■ 62 │ GB │ MT
"6 lights up .
SRK 400 A2