INSTRUCTION MANUAL FOR PULSE OXIMETER/
MANUAL DE USO PARA PULSIOXÍMETRO
Model/Modelo: PX-03
9 Troubleshooting
Trouble
The SpO
and
1. The finger is not properly
2
Pulse Rate can
positioned.
not be
2. The patient's SpO
low to be detected.
displayed
normally
1. The finger is not placed
The SpO
and
2
inside deep enough.
Pulse Rate are
not displayed
2. The finger is shaking or the
stably
patient is moving.
1. The battery is drained or
almost drained.
The device can
2. The battery is not inserted
not be turned
properly.
on
3. The malfunction of the
device.
1. The device will power off
automatically when it gets no
The display is
signal within 5 seconds.
off suddenly
2. The battery is almost
drained.
Possible Reason
is too
2
Solution
1. Place the finger properly
and try again.
2. Try again; Go to a
hospital for a diagnosis if
you are sure the device
works all right.
1. Place the finger properly
and try again.
2. Let the patient keep calm
1. Change battery.
2. Reinstall battery.
3. Please contact the local
service center.
1. Normal.
2. Change battery.