Product Safety Information; Product Specifications; Torque Adjustment - Ingersoll Rand EL 24V Serie Manual De Instrucciones

EN

Product Safety Information

Intended Use:
These hand-held electric tools are designed for threaded joint fastening applications.
• Use only with EC24E, EC24U or EC24E-N Controllers.
• Do not adjust the torque setting higher than 7 on the Torque Scale.
Duty Cycle:
MAX 0.5 sec "ON"
MIN 3.5 sec "OFF"
• Do not tighten more than 900 tapping screws (size: 2 mm, length: 4 mm) per hour.
For additional information refer to Hand-Held Electric Tools used with a Controller Product
Safety Information Manual Form 16573685.
Manuals can be downloaded from www.ingersollrandproducts.com

Product Specifications

Volts
Model
(Direct Current)
EL0109E 24
EL0410E 24
EL0410EC 24
EL1007E 24
EL1007EC 24
Length
Model
in.
EL0109E 8.81
EL0410E 9.25
EL0410EC 10.25
EL1007E 9.25
EL1007EC 10.25

Torque Adjustment

To adjust the torque on these screwdrivers, proceed as follows:
1. Determine the torque output of the tool by checking a tightened fastener with a torque
wrench.
2. Increase or decrease the torque output by rotating the Spring Adjusting Ring. Rotating
the Ring clockwise to a higher number on the Torque Scale increases torque output while
rotating the Ring counterclockwise to a lower number decreases the torque output.
The numbers from one to seven on the Torque Scale are reference numbers only and are
not an indication of actual torque output.
EN-1
WARNING
Revolutions
Per Minute
650 - 950
750 - 1000
750 - 1000
500 - 700
500 - 700
Drive Size
mm in.
223.7 0.16 RD.
234.9 0.25 HEX
260.3 0.25 HEX
234.9 0.25 HEX
260.3 0.25 HEX
NOTICE
Torque Range
in - lbs Nm
0.26 - 1.30 0.03 - 0.15
0.44 - 4.79 0.05 - 0.54
0.44 - 4.79 0.05 - 0.54
1.74 - 10.44 0.19 - 1.17
1.74 - 10.44 0.19 - 1.17
Sound Pressure dB (A)
(ANSI S5.1 1971)
56.9
56.9
56.9
56.9
56.9
Weight
lbs kg
0.8 0.36
0.9 0.41
1.0 0.45
0.9 0.41
1.0 0.45
Vibration Level
(ISO28927)
m/s
2
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
16578668_ed1