Product Specifications - Ingersoll Rand 7 Serie Especificaciones Del Producto

Product Safety Information
Intended Use:
These tools are designed to remove and install threaded fasteners.
For additional information refer to Air Screwdrivers Product Safety Information
Manual Form 04585006.
Manuals can be downloaded from www.irtools.com.

Product Specifications

Model(s)
7RALC1 Reversible pistol
7RALC3 Reversible pistol
7RAMC1 Reversible pistol
7RAMC3 Reversible pistol
7RLLC1 Reversible lever
7RLMC1 Reversible lever
7RAMP1 Reversible pistol
7RANP1 Reversible pistol
7RALD1 Reversible pistol
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily.
Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip device
across any hose coupling without internal shut-off, to prevent hose whipping if a hose fails
or coupling disconnects. See drawing 16585762 and table on page 2. Maintenance
frequency is shown in circular arrow and defined as h=hours, d=days, and m=months.
Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
80167299_ed1
Style Clutch Type
Adjustable cushion
Adjustable cushion
Adjustable cushion
Adjustable cushion
Adjustable cushion
Adjustable cushion
Positivejaw
Positivejaw
Directdrive
7.
8.
9.
10. Grease - through fitting
11. Grease (disassembly required, see
Torque Range (soft draw)
115 (13.1) @ 90 psi
91 (10.3) @ 50 psi
165 (18.8) @ 90 psi
Coupling
Safety Air Fuse
Oil
maintenance instructions)
EN
Recommended
in-lbs (Nm)
15-75 (1.7-8.5)
15-75 (1.7-8.5)
20-110 (2.3-12.5)
20-110 (2.3-12.5)
15-75 (1.7-7.4)
20-110 (2.3-12.5)
63 (7.2) @ 50 psi
39 (4.4) @ 50 psi
70 (8.0) @ 90 psi
EN-1