Product Technical Specifications; Ec Declaration Of Conformity - Nice To-Max Instrucciones De Instalacion Y Uso

PRODUCT TECHNICAL SPECIFICATIONS

Characteristic
Power supply voltage
Power absorption
(electronic limit switch) Stand-By
Encoder sensitivity
Maximum admissible torque
Motor body diameter
Continuous operation time
Connection cable length
Operating temperature
IP Protection rating
Mechanical resistance
Note:
– All technical characteristics refer to an ambient temperature of 20°C (± 5°C).
– Nice S.p.a. reserves the right to apply modifications to the product at any time when
deemed necessary, while maintaining the same functionalities and intended use.
Value
230 Vac – 50 Hz
1,8 W
2,67°
5 / 8 / 15 Nm
45 mm
4 min
2,5 m
-20 °C ÷ 55 °C
IP 44
According to standard EN 14202

EC DECLARATION OF CONFORMITY

EC Declaration of conformity according to directives 73/23/EEC
and 89/336/EEC
Note: the contents of this declaration correspond to the declaration in the official document, regis-
tered at the premises of Nice S.p.a., and more specifically to the latest revision available before
printing this manual. The text here has been revised for publishing purposes.
Number: 272/TO-MAX Revision: 0
The undersigned, Lauro Buoro, in the role of Managing Director, declares under his
sole responsibility, that the product:
Manufacturer's name: Nice S.p.a.
Address: Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy
Type: Electronic controller TO-MAX for tubular gearmotor for
rolling shutters and sun awnings
Models: XMC01
Accessories:
complies with the requirements of the following EC directives, as amended by Direc-
tive 93/68/EEC of the European Council of 22 July 1993:
• 73/23/EEC; DIRECTIVE 73/23/EEC OF THE EUROPEAN COUNCIL of 19 February
1973 regarding the approximation of member state legislation related to electrical
material destined for use within specific voltage limits.
According to the following harmonised standards:
EN 60335-1:1994+A11:1995+A1:1996+A13:1998
+A14:1998+A15:2000+A2:2000+A16:2001; EN 60335-2-97:2000,
EN 50366:2003+A1:2006
• 89/336/EEC; DIRECTIVE 89/336/EEC OF THE EUROPEAN COUNCIL of 3 May
1989, regarding the approximation of member state legislation related to electro-
magnetic compatibility.
According to the following harmonised standards:
EN 55014-1:2000+A1:2001+A2:2002 ; EN 55014-2:1997+A1:2001,
EN 61000-3-2:2006; EN 61000-3-3:1995+A1:2001+A2:2005
Oderzo, 29 March 2007
Lauro Buoro
(Managing director)
English – 13