Technical Data - Seca 220 Instrucciones De Montaje

Ocultar thumbs Ver también para 220:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
for measuring below 130.5 cm
(51.3 inch):
2
• release lock
(2) by press-
ing on it
• push measur-
ing slide
downwards.
• read-off mark
(3).
3. The person to be measured positions
him or herself under the measuring
slide.The back and head must be
straight.
4. The measuring slide is pushed onto the
head to that the measuring slide abuts
without bending.
5. Read off body height at the read-off
mark. If the above-mentioned instruc-
tions are followed, accuracy greater than
± 5 mm can be achieved.
Cleaning
Clean the measuring rod as required using
a domestic cleaning agent or commercially-
available disinfectant. Follow the manufac-
turer 's instructions.
8

Technical data

Measurement range: 60-200 cm /
Graduations:
Accuracy
Dimensions
(W x H x D):
Weight:
Temperature range:
Medical product in
accordance with
Directive 93/42/EEC: Class I with
3
Disposal
Should the measuring rod no longer be able
to be used,the responsible waste disposal
association will be glad to give you informa-
tion about the measures necessary to dis-
pose of it properly.
Warranty
A two-year warranty from date of delivery
applies to defects attributable to poor ma-
24-78 inch
terials or workmanship. All moveable parts
1mm /1/8 inch
- batteries, cables, mains units, rechargea-
greater than ±5 mm
ble batteries etc. - are excluded. Defects
which come under warranty will be made
55 x 784 x 34 mm
good for the customer at no charge on pro-
ca.700 g
duction of the receipt. No further claims can
+10 °C up to +40 °C
be entertained. The costs of transport in
both directions will be borne by the custom-
er should the equipment be located any-
where other than the customer's premises.
measuring function
In the event of transport damage, claims
under warranty can be honoured only if the
complete original packaging was used for
any transport and the merchandise secured
and attached in that packaging just as it
was when originally packed. All the packag-
ing should therefore be retained.
A claim under warranty will not be honoured
if the equipment is opened by persons not
expressly authorised by seca to do so.
We would ask our customers abroad to
contact their local sales agent in the event
of a warranty matter.

Publicidad

Tabla de contenido
loading

Tabla de contenido