Briteq LDP POWERBAR 12TC Manual De Instrucciones página 6

ENGLISH
Display Inversion
Display normal: display is readable when the unit is on the floor.
Display inversion: display is readable when the unit is installed upside down.
 Press the MENU button until
is shown on the display. (normal display)
 Press the ENTER button to toggle between
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
Fixture Hours
Used to show the number of working hours of the unit.
 Press the MENU button until
is blinking on the display.
 Press the ENTER button to show the number of working hours in the display.
To go back to the main menu without any change press the MENU button shortly.
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
Software version
Used to show the software version that is installed in the unit
 Press the MENU button until
is blinking on the display.
 Press the ENTER button to show the software version on the display.
To go back to the main menu without any change press the MENU button shortly.
If you want to go back to normal running mode: press the MENU button for about 2 seconds.
DMX-CONFIGURATION OF LD-POWERBAR:
MODE 1
BRITEQ
®
OPERATION MANUAL
(normal display) and (display inversion).
MODE 2
LDP-POWERBAR 6/12TC
ENGLISH
MODE 4
BRITEQ
®
OPERATION MANUAL
MODE 3
MODE 5
LDP-POWERBAR 6/12TC