Care & Maintenance; Checklist; After-Sales Service - bloom fresco Manual Del Usaurio

eng
d Seat Unit Height
To adjust seat height, disengage the
swivel/height resistor. Lift both A & B trigger
simultaneously, whilst pushing downwards or
pulling upwards to desired height, then release
the triggers.
Care & Maintenance
Removing the baby chair seat pad:
1. Remove the shoulder and waist straps from
the seat unit. Pull the straps through the seat
slits until they are free of the seat pad.
2. Remove the baby chair seat pad.
3. To remove the entire safety harness, free
crotch strap by sliding the crotch bar base out
of the seat unit.
4. The seat pad and baby chair frame can now
be cleaned following the instructions given
below:
• Note: Exposed edges of the micro-suede™
and leatherette seat pad are often the first to
wear and fray. Remember this when storing
or transporting your baby chair.
• Light soiling of the micro-suede™ and
leatherette seat pad can be removed with a
damp sponge and a mild detergent. Hang
dry. Do not tumble dry.
• For heavier staining to the micro-suede™ and
leatherette seat pad –
1. Rinse dirt under tap water.
2. Blot excess liquid with a clean, dry white
cloth or paper towel.
3. Apply lemon juice or stain removal spray
on stained spot following manufacturer's
instructions.
8
4. Apply small amount of mild detergent with
warm water. Blot.
5. Sponge with clear water. Blot.
6. Repeat above steps if necessary.
• Fabric care:
– Hand wash only
– Do not bleach
– Do not tumble dry
– Do not iron
– Do not wring
– Do not dry clean
• Both mini tray and food tray are dishwasher
safe.
• Clean the plastic parts of the highchair with a
damp cloth, do not use abrasives or bleach.
Check List
• Regularly check that the safety harness is
correctly fitted and that the webbing has not
become frayed or damaged. If the harness
is damaged, we recommend that a new one
is fitted. For more information contact us by
email at service@bloombaby.com.
• Regularly check that all locking devices are
clean and functioning properly.
After Sales Service
When you receive your bloom product, if you
need assistance, spare parts or if you are
unsatisfied with any aspect of the
goods please contact bloom by email at