Procedure - Sputnik Engineering SolarMax 2000S Documentación Del Dispositivo

PLEASE NOTE: if a fault occurs during the tests or the irradiance is too low the
Auto Test is aborted and the message "Auto Test aborted" appears in the display
together with an associated error message.

4.3 Procedure

Maximum voltage
1. The set voltage monitoring threshold Vac max is displayed.
2. The threshold value is decremented linearly until it reaches the current mains
voltage value and mains monitoring is triggered.
3. The trigger value, the delay time, the current value and the default voltage
monitoring value (Vac max) are displayed.
Minimum voltage
1. The set voltage monitoring threshold Vac min is displayed.
2. The threshold value is incremented linearly until it reaches the current mains
voltage value and mains monitoring is triggered.
71
3. The trigger value, the delay time, the current value and the default voltage
monitoring value (Vac min) are displayed.
Maximum frequency
1. The set frequency monitoring threshold f max is displayed.
2. The threshold value is decremented linearly until it reaches the current mains
frequency value and mains monitoring is triggered.
3. The trigger value, the delay time, the current value and the default frequency
monitoring value (f max) are displayed.
Minimum frequency
1. The set frequency monitoring threshold f min is displayed.
2. The threshold value is incremented linearly until it reaches the current mains
frequency value and mains monitoring is triggered.
3. The trigger value, the delay time, the current value and the default frequency
monitoring value (f min) are displayed.
After the Auto Test is complete the inverter returns to normal operation.
en
72