Sputnik Engineering SolarMax 2000S Documentación Del Dispositivo página 41

Use the key to confi rm resetting of all statistics. Use the
menu without resetting the statistics.
Confi guration
The following limit values and operating parameters cannot be modifi ed via
the graphics display, because they are part of the country-specifi c settings (see
also section 3.6.).
Country The installation country set during commissioning is
displayed here
Vac min Minimum permissible mains voltage
Vac max Maximum permissible mains voltage
Vac 10min max Maximum permissible mean value of the mains voltage
over the last 10 minutes
Iac max Maximum mains current
Ierr max
Maximum permissible fault current (rms value) on the
DC side
Iac mean max Maximum permissible DC component of fed-in mains
current
Pac max Maximum AC output that can be fed in
f max Maximum permissible mains frequency
f min Minimum permissible mains frequency
Restart delay Grid feeding delay after disconnection from the mains
df/dt max Maximum permissible mains frequency variation per
second
79
key to exit the Use the arrow keys
to the main menu.
Settings
The following settings can be implemented via the graphics display:
and to display any value. Use the
Language Language selection: German, English, French, Italian or
Spanish
Time Internal clock setting
Date Current date setting
Device address Enter a device address between 1 and 249. If several
inverters are connected to form a network, each device
must have a different address.
Ethernet Switches the Ethernet interface on or off
IP address Ethernet interface confi guration (see section 7)
Netmask Ethernet interface confi guration (see section 7)
TCP port Ethernet interface confi guration (see section 7)
Status relay Defi nes the function of the status signalling contact (see
Section 3.9)
Status relay delay Delay time setting for the status signalling contact
en
key to switch back
80