Names And Functions Of Components; Focus Ring - Panasonic LUMIX H-X012 Instrucciones De Operación

Names and Functions of
Components
1 2 3
1 Lens surface
2 Aperture ring
Rotate this to adjust the aperture value.
• If you set the camera to Aperture-Priority AE Mode or
Manual Exposure Mode, the aperture value of the ring will
be enabled.
• If you set the position of the aperture ring to [A], the
aperture value of the camera will be enabled.

3 Focus ring

Rotate to focus when taking pictures with manual focus (MF).
4 5
6 7
4 [AF/MF] switch
This allows you to switch between Auto Focus (AF) and
Manual Focus (MF).
• When either the [AF/MF] switch of the lens or the setting of
the camera is set to [MF], Manual Focus (MF) is enabled.
5 Lens fitting mark
6 Contact points
7 Lens mount rubber
Note
• When you take pictures with the camera's flash, the
periphery of the screen may appear dark. In that case, we
recommend using an external flash.
• In very quiet situations Auto Focus operating sounds may
be recorded during motion picture recording. This is not a
malfunction. In such situations, switching to Manual Focus
will improve the situation.
• The aperture can be adjusted with the aperture ring only
when a Panasonic digital camera is attached to the lens.
(As of June 2016)
5
SQT1299