Mute Function - AKASO DL2 Manual De Usuario

Back
ScreenSaver
Format
DefaultSetting
Version
4. Use the camera function
Back to main interface, please click the
5. One key lock function
The unit has one key lock function. When the driving function is turned on, click on the
main interface [video lock] icon
driving function interface, click the upper right corner of the icon
will be locked, and cannot be overwritten.
6. Date and time settings
In the main interface, click the [System Settings] icon, click [Common Settings] to enter
the date / time settings. As shown below:
RecordSetting
2/2
Common Setting
icon to enter the camera mode.
, the entire video image will be locked; or enter the
. Then entire video
7
Back
Date/Time
Year Month Date
2017 09 22
Note:
In order to effectively record the date and time of forensic of traffic safety
accident, please set the correct time immediately before using the machine.

7. Mute Function

In the main interface, click the [Voice Record] icon
recording.
8. File playback
In the main interface, click the [Playback Mode] icon
playback, click on the screen [Previous] or [Next] to select the video / photo, or press
[UP] or [DOWN] to select.
9. Rear View
First of all, you must connect a rear camera to the recorder with the extension of long
lines. When the car engine starts, the recorder will work automatically.
10. Parking mode
In the main interface, click [System Settings] icon menu settings, click [General
Settings]; Open the parking mode: the recorder will start to work based on G-SENSOR
induction to automatically save 30 seconds video when the vehicle is shut down. When
the park mode is not turned on, the recorder will not be turned on by vibration.
Hour Minute Second
RecordSetting
12 00 00
Common Setting
to a key to open or close the
to enter the video / photo
8