Modes Of Operation; Prevention Misfilling (Optional) - Graco 127649 Manual De Instrucciones

F

MODES OF OPERATION

FOREWORD The main feature of these nozzles is that they are easy to
use.
Two operating modes are available:
1 Dispense by operating the nozzle lever. To interrupt dis-
ASSISTED MODE pensing manually, release the lever.
2 Use the opening lever lock device for automatic dispens-
AUTOMATIC MODE ing.
To continue dispensing after automatic stop, the lever
must be fully released before proceeding to operate it
again.
To interrupt dispensing in manual mode, press the lever
again, thereby releasing the device, and then release.
NOTICE Do not use the nozzle outside the parameters indi-
cated on the "technical specifications" chart
NOTE Dispensing is automatically interrupted due to the
shut-off device, which operates when the level of the
liquid reaches the end of the spout.
G

PREVENTION MISFILLING (optional)

PREMISE
Refuelling with the nozzle equipped with "magnet switch"
is only possible in combination with the "magnet adapter"
, so misfuelling into tanks is made impossible
OPERATION The "magnet switch" is a fi ed magnetic field within the
filler necks of the nozzle. This opens the magnet switch in
the spout, so it is only possible to dispense from the tank
where the magnet adaptor is installed.
NOTICE Nozzles equipped with "magnet switch" work only in
combination with the "magnet adapter". The "mag-
net adapter" is an optional to be bought separately.
PART NUMBER DESCRIPTION
127652 Magnet switch misfil s out
127654 Magnet adapter misfi
adapter (installs into DN40
filler necks onl
M0302
PICTURE
EN
7