Tabla De Contenido - Sun Enterprise 450 Notas Sobre El Producto

Sun Enterprise 450 Server
Product Notes
These Product Notes contain late-breaking product information that is not included
in the system or the multimedia documentation for Sun Enterprise™ 450 servers.
Included in these Product Notes are the following topics:
"Verifying Support for 480-MHz CPU Modules" on page 2
"Identifying the OpenBoot Firmware Image Revision" on page 3
"Identifying UltraSPARC II CPU Modules" on page 4
"Configuring the CPU Modules" on page 5
"Removing or Installing a CPU Module" on page 5
"Removing and Replacing the CPU Air Guide" on page 6
"Main Logic Board Jumpers" on page 12
"Opening and Closing the Removable Media Assembly Door" on page 14
"Removing or Installing the NVRAM Module" on page 15
"Determining Your Power Supply Needs" on page 15
"Power Supply Memory Latch Function" on page 17
"System Software Requirements" on page 17
"SPARCstorage MultiPack Units" on page 18
"Environmental Requirements" on page 18
"Installing the SCSI Drive Data Cable" on page 19
"Attaching an Alphanumeric Terminal" on page 20
"Rackmounting the Sun Enterprise 450 Server" on page 21
"Connecting Rackmounted Peripherals" on page 21
"Electromagnetic Compatibility" on page 22
"Upper Blower Assembly" on page 23
"Power Interlock" on page 23
"Illustrated Parts Breakdown" on page 24
en-1