AKG MicroMic III Serie Modo De Empleo página 19

2
Fig. 3: Using the B 29 L to power the microphone.
To avoid damaging the cable, never try to
pull out the cable itself!
2. Connect the B 29 L (2) to the desired input.
Use a commercial XLR cable (3) to connect the
B 29 L (2) to a balanced input.
Refer to section 2.2.2 above.
1. Push the mini XLR connector (1) on the micro-
phone cable into the mini XLR socket (2) on the
cable of the MPA III L (3) to the stop.
MPA
Phantom
3
4
Fig. 4: Connection diagram with MPA III L.
1
B 29 L
4
Mini XLR
2 Interfacing
3
Mini XLR
2
1
5
5
Important!
Balanced input:
Refer to fig. 3.
Unbalanced input:
2.3.2 Using the
MPA III L
Refer to fig. 4.
MPA
3
19