Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
®
INSTALLATION for non-drop ceiling or wall
1. Slide wall/ceiling mounting bracket off the back of the gateway.
2. Attach mounting bracket to wall/ceiling with two self-tapping screws.
3. Slide gateway back onto mounting bracket.
4. Log into Workplace Advisor Subscription and update device location information
(see page 6).
Step 1
Step 2
ceiling
Step 3
WARNING
Gateway placement guidelines
·
Network preparation must be done by an IT professional
·
MUST BE installed using mounting hardware
·
RECOMMENDED placement is on ceiling
MUST HAVE PoE Ethernet connection
·
MUST NOT be installed with adhesive tape
·
MUST NOT be installed in plenum-rated or air-handling spaces
·
·
MUST NOT be installed within a metal enclosure or under flooring
·
MUST NOT be installed above drop ceilings
·
MUST NOT be installed horizontally on a wall,
only vertically as shown below:
Page 3 of 23
1083747001 Rev D
Publicidad
Tabla de contenido
