Publicidad
Idiomas disponibles
Idiomas disponibles
OVERVIEW
The new module of control COMPACT will be the heart of the full range of digital panels
of auta Comunicaciones.
module in order to give it the versatility needed to operate with keyboard, push-buttons or
mixed panels, working in installations with or without SDLs.
Basically, the new module of control COMPACT maintains and enhances the excellent
performance the old module of control DECORPLUS has. The following gives a brief
explanation of what these improvements are:
Both push-buttons or keyboard panels can be connected. The circuit has
o
physic connectors to plug a keyboard, a push-buttons panel or both
simultaneously. Each time the system is restarted or the number of panel is
changed using the dip-switch, it will automatically detect if you have
connected one thing or the other. To connect keyboard and push-buttons at
the same time, the push-buttons must be connected to rows F1-F2-F3-F4 and
columns C4-C5-C6. Thus, up to 12 push-buttons may be connected calling to
the codes 4-5-6, 12-11-10, 16-17-18 and 22-23-24
It can operate as a traditional panel without having to load registers.
o
The DECORPLUS panel always needed to load a database to start working.
Sometimes, this could be a bit cumbersome if our installation had no
requirement about the calling codes to use. The new panel COMPACT will
operate as a traditional panel if its database is empty, and as a DECORPLUS if
any register to add records in your database
The system allows to assign any call code to the push-buttons, even if
o
the panel is set as external. Enter the Directory Menu and edit the register
whose call code matches with the push-button code you want to reassign.
Note that this means you can make a call form any push-button to the SDL-
Telephone you want to.
It is able to transmit the DB to a PC or to another module of control. It
o
is possible to recover a database loaded into a module of control and pass it to
a PC file using the auta Communications PC KIT. It is also possible to load
other modules of control with one already loaded, using a 4-wire cable which
has the two core lines crossed (TX and RX).
An advertising screen may be shown on the display's screen. The
o
installers can add their own advertising screen using the auta Communications
PC KIT. This screen will be shown at the end of any operation performed in the
panel
Its performance as push-button panel is very simple. The module of control allows
connecting wires up to 11 rows and 6 columns, so without making any move to reassign
push-buttons, it is possible to call from code 1 to 66.
Its performance as a keyboard panel is almost the same as the DECORPLUS panel
was, and it is detailed bellow.
1
These codes may be reassigned later.
To do this, it has been necessary to improve the features of the
20
PLACA COMPACT – COMPACT PANEL
Funcionamiento-Functioning
1
.
Publicidad
