Publicidad
Idiomas disponibles
Idiomas disponibles
In the previous example, the codes that should have been generated are the following:
SDL1
FLOOR1
o
FLOOR2
o
FLOOR3
o
SDL2
FLOOR1
o
FLOOR2
o
To verify that, indeed, these are the codes stored in the data base, the option
'Display/Change: 3' should be selected inside the Directory Menu. Notice that the first
register shown corresponds to the last register in the installation and, if C key is pressed,
the system returns back to show the first register in the installation.
Display / Change: 3
Press 3. Shows the last register
inserted with the automatic code
generation.
Press C. Returns back to the
first register in the Data Base.
In this mode, the registers can be edited with the keyboard. To exit this 'Edit'
mode, we should place the cursor over the "open cod." field of any register (keep in mind
that we can go through the fields of a register with the key), and then press the C key.
8
It is easy to guess that, in the 'Auto' mode, the values accepted for the number of SDLs, Floors and Flats will
be from 1 to 99. The code generated for the Open Code is always '0' for security reasons. It is not safe to have
too many codes that can open the door.
m/t = 1, SDL = 1, Open Code = 000000, Call Code = 010101
m/t = 2, SDL = 1, Open Code = 000000, Call Code = 010102
m/t = 3, SDL = 1, Open Code = 000000, Call Code = 010103
m/t = 4, SDL = 1, Open Code = 000000, Call Code = 010104
m/t = 5, SDL = 1, Open Code = 000000, Call Code = 010201
m/t = 6, SDL = 1, Open Code = 000000, Call Code = 010202
m/t = 7, SDL = 1, Open Code = 000000, Call Code = 010203
m/t = 8, SDL = 1, Open Code = 000000, Call Code = 010301
m/t = 9, SDL = 1, Open Code = 000000, Call Code = 010302
m/t =10, SDL = 1, Open Code = 000000, Call Code = 010303
m/t = 1, SDL = 2, Open Code = 000000, Call Code = 020101
m/t = 2, SDL = 2, Open Code = 000000, Call Code = 020102
m/t = 3, SDL = 2, Open Code = 000000, Call Code = 020103
m/t = 4, SDL = 2, Open Code = 000000, Call Code = 020201
m/t = 5, SDL = 2, Open Code = 000000, Call Code = 020202
c
c
PLACA COMPACT – COMPACT PANEL
Funcionamiento-Functioning
m
/
t
=
█
5
a
l
l
=
m
/
t
=
█
1
a
l
l
=
31
8
S
D
L
=
2
0
2
0
2
0
2
S
D
L
=
1
0
1
0
1
0
1
Publicidad
