Kenmore 721.35820500 Manual Del Propietário página 14

Remove string or hair that may be wrapped
around the agitator.
WARNING
Be careful when removing the
agitator as the belt tension is high.
Failure to do so could result in
personal injury from the agitator
releasing quickly and snapping away.
TO REPLACE BELT
Seat the left end of agitator into nozzle base.
Loop the new belt on the motor shaft.
Loop the other end of belt onto the belt
pulley on the right end of agitator.
Belt
Pull right end of agitator forward and seat it
into nozzle base.
To seat agitator right end, put right end of
agitator into slot in nozzle base as shown.
Press firmly, checking to see that each end
is completely inserted.
To replace the nozzle cover, follow the
NOZZLE COVER REMOVAL /
INSTALLATION section.
-14-