Parts And Components; Before Use; Operation; Cleaning And Maintenance - cecotec Conga POPSTAR 4000 ULTIMATE ANIMAL PRO Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
1.
High-efficiency filter
2. Dual cyclone filter (mesh and sponge filters)
3. Transport handle
4. Power button
5. Cord-winding button
6. Power controller
7.
Dust tank release button
8. Suction base
9. Telescopic tube
10. Flexible tube
11. Accessory for corners
12. Accessory for furniture
13. Brush for garments
14. Accessory-holder
15. MiniBrush accessory for upholstery
16. Bristle brush
Fig. 3
1.
Power selector
2.
Cord-winding button
3.
On/off button

2. BEFORE USE

Remove all packaging materials.
Inspect all parts of the appliance for visual damage. Unwind the power cord completely and
inspect it for damage. Do not use the appliance if the device or its cord have been damaged or
are not working properly. In case of damage, contact the official Technical Support Service of
Cecotec for advice, repairs, or returns.
Make sure you have read and understood all instructions and warnings in this instruction
manual. Pay particular attention to the safety instructions on previous pages.
Attach the flexible tube to the air intake channel. Push until the tube locks with a click.
Fig. 2
Insert the end of the handle of the flexible tube into the telescopic tube.
Extend the telescopic tube by sliding the plastic button and pulling from the upper part of the
tube. Adjust its length to your liking.
Insert the telescopic tube into the floor brush.
Unplug the appliance from the mains supply before assembling or removing any accessory.
32
CONGA POPSTAR 4000 ULTIMATE ANIMAL PRO

3. OPERATION

Once all parts are in place, unwind a reasonable length of the cord and plug the appliance
into a grounded wall outlet. A yellow mark on the power cord marks the ideal length. Do not
pull the power beyond the red mark.
Press the On/off button to turn the device on.
Suction power can be adjusted with the power controller on top of the appliance.
Use the most appropriate accessory depending on the kind of cleaning:
Accessory for furniture: Perfect for vacuuming on wardrobes, chairs, tables, etc. without
damaging them.
Accessory for garments: For all kind of garments and upholsteries (sofas, armchairs, etc.).
Accessory for corners: Vacuum the dirt on corners and sockets.
Mini AirBrush accessory for upholstery: Removes animal hair from sofas, chairs, etc.
Bristle brush: Achieve a deep cleaning in every corner.
Once finished, unplug the appliance and use the cable-winder button to rewind the cord into
the appliance. Use one hand to press the button and guide the power cord with the other.
Fig. 3
Note: Please note that there is a safety switch inside the vacuum cleaner to prevent the
unitfrom being run at high vacuum rates. If the vacuum is too high, the safety switch will be
turned on. In this case, it can diminish the vacuum rate and protect the motor from being
damaged.

4. CLEANING AND MAINTENANCE

Press the release button on top of the dirt container and remove it from the main body of the
appliance.
Press the button on the lower end of the container to open its lid and empty its contents.
Fig 4.
Clean the outside of the appliance with a damp cloth. Do not use abrasive cleaning agents as
they could damage the product.
Use the handle on top of the appliance to carry it.
Fig. 5
Cleaning of the filters
Dual Cyclone filter
Press the release button on top of the dirt container and remove it from the main body of the
appliance.
Hold the container's body and rotate its upper lid counterclockwise to remove it.
Remove the Dual Cyclone system.
CONGA POPSTAR 4000 ULTIMATE ANIMAL PRO
ENGLISH
33

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido