Extel AUDIOGLASS 651 Guía De Instalación Y Uso página 46

4 ACCESSGLASS
This module is essential for :
Install the module on the back of a pillar. For a cleaner look, route the wires through the pillar.
The 3 metre long cable may be cut to length if necessary.
a- Connecting the 6-conductor cable to the roadside panel
ACCESSGLASS MODULE POWERED BY 4 LR20 (D) BATTERIES
(Remember to take out the four LR06 batteries from the roadside panel if present).
6-conductor cable
black wire
red wire
no wire
green wire
brown wire
orange wire
yellow wire
ACCESSGLASS MODULE POWERED BY A 12-24 V AC OR DC SUPPLY
(Remember to take out the four LR06 batteries from the roadside panel if present & LR20).
6-conductor cable
black wire
no wire
red wire
green wire
brown wire
orange wire
yellow wire
When wired as above, the nameplate on the roadside panel is lit continuously.
1- Powering the roadside panel.
2- Controlling an electric strike plate or lock.
3- Controlling an automatic gate opener.
Terminal blocks on back
of roadside panel
-
+ LR20
+ DC
D+
D-
G+
G-
Terminal blocks on back
of roadside panel
-
+ LR20
+ DC
D+
D-
G+
G-
46GB