Panasonic WV-Q126E Instrucciones De Operación página 11

11. Connect the cables to the base unit or
the camera.
See the camera installation guide for infor-
mation on how to connect the camera
wires.
12. Mount the camera.
1
Attach the camera to the base unit or
the camera mounting bracket you
attached in Step 9.
2
Secure the camera with 1 piece of the
camera fixing screw (supplied with the
camera).
(Recommended tightening torque:
0.68 N m {7.0 kgf
•
* See the camera installation guide for
details on how to install the camera.
Important: Make sure you hold the cam-
era main unit when you attach it.
Holding the camera dome cover during
attachment may cause damage to the
cover.
13. Remove the protective sheet from the camera dome cover.
14. Mount the decorative cover.
1
Align the 3 lines on the side of the dec-
orative cover with the 3 lines on the
mounting chassis to attach.
2
Turn the decorative cover clockwise
while pressing the cover upward and
the cover is locked.
cm})
•
Roof
Rotate
Camera
3 lines on the mounting chassis
* 1 position on the rear side
1
3 lines on the decorative cover
* 1 position on the rear side
Base unit
Camera main unit
Camera dome cover
2
11