Control Panel Description; Home Screen; Exiting Auto Show And Static Modes - Chauvet Professional NEXUS 4X4 Guía De Referencia Rápida

Nexus™ 4x4 QRG
Control Panel
Description

Home Screen

Exiting Auto
Show And
Static Modes
Menu Map
Main Level
Auto Show
Static
Dimmer Mode
Back Lite
Button
<MENU>
Scrolls through the main menu options or exits the current menu option.
<ENTER>
Enters into the highlighted menu option or sets the currently selected value.
<UP>
Navigates up through a list of menu options or values.
<DOWN>
Navigates down through a list of menu options or values.
The home screen on the control panel display shows the current operating state
as follows:
·
<Master> if the Nexus™ 4x4 is in Standalone or Master mode
·
<Slave> if the Nexus™ 4x4 is in Art-Net™, Kling-Net, or DMX mode
Auto Show and Static modes are not exited automatically when another
mode is selected. To exit Auto Show or Static mode, do the following:
1. Go to the Master/Slave main level.
2. Select Slave.
3. Press <ENTER>.
4. Press <MENU> for 10 seconds.
Setting changes are not activated until the control panel display
returns to the home screen. To return the control panel display to the
home screen press and hold <MENU> for 10 secs.
Programming Levels
Auto 1–12
Fade
Fixture Color
Manual Color
Off
Dimmer 1–3
On
10S
20S
30S
Selects an auto program and its speed
Show Speed
000–100
Selects color fade and its speed
R
G
B
GB
Selects a preset color
RB
RG
RGB
R
G 000–255 Sets color levels for manual color mixing
B
Sets dimming curve
Sets control panel backlight time
8
Function
Description
EN