Conceptronic C54APM Guia De Inicio Rapido página 34

ENGLISH
4. You can start configuring the Access Point.
From Wireless Station
2. Make sure your wireless station is in the same subnet with the Access Point. Please
refer to the step 1 above for configuring the IP Address and Sub Mask of the wireless
station.
3. Connect to the Access Point.
The Access Point's ESSID is "WLAN" and the WEP Encryption function is disabled. Make sure your wireless
station is using the same ESSID as the Access Point and associate your wireless station to the Access
Point.
5. Enter 10.0.0.1 from Web Browser to get into the Access Point's configuration tool.
Enter the user name and password and then press OK button and you are available to
6.
configure the Access Point now.