Conceptronic C54APM Guia De Inicio Rapido página 41

ENGLISH
3.2.8 Repeater Mode Configuration
If you want an access point to bridge wired Ethernet network and provide connection service
for other wireless station at the same time, you have to set the access point to "Repeater
mode". Simply speaking, "Repeater mode" function is the combination of "AP mode" and
"PMP mode".
Parameter
Parent MAC Address
Child MAC Address
Mode
Broadcast SSID
Channel
Description
You have to enter the MAC addresses of other
access points that join the bridging work.
You have to enter the MAC addresses of other
access points that join the bridging work.
802.11b mode: It allows to select the transmit
rate up to 11Mbps 802.11g mode: It allows to
select the transmit rate up to 54Mbps
Mixed mode: It provides best performance for
11g transmission when you enable the AP
mode selection to "Mixed mode".
It will respond to Broadcast SSID requests. If
you enable this function, every wireless station
located within the coverage of this access point
can discover this access point easily. If you are
building a public wireless network, enabling
this feature is recommended. Disabling
"Response to Broadcast ESSID requests" can
provide better security.
Select the appropriate channel from the list
provided to correspond with your network
settings. Channels differ from country to
country.