Conceptronic C54APM Guia De Inicio Rapido página 39

ENGLISH
3.2.2 AP Mode configuration
This Access Point
supports AP modes. "AP Mode" provides pure access point function. The simplest
way to build up a wireless LAN is to use "AP Mode".
Parameter
Mode
SSID
Broadcast SSID
Channel
Description
802.11b mode: It allows to select the transmit
rate up to 11Mbps 802.11g mode: It allows to
select the transmit rate up to 54Mbps
Mixed mode: It provides best performance for
11g transmission when you enable the AP
mode selection to "Mixed mode".
The SSID (up to 32 printable ASCII characters)
is the unique name identified in a WLAN. The
ID prevents the unintentional merging of two
co-located WLANs. Please make sure that the
SSID of all stations in the same WLAN network
are the same. The default SSID is "WLAN".
It will respond to Broadcast SSID requests. If
you enable this function, every wireless station
located within the coverage of this access point
can discover this access point easily. If you are
building a public wireless network, enabling
this feature is recommended. Disabling
"Response to Broadcast ESSID requests" can
provide better security.
Select the appropriate channel from the list
provided to correspond with your network
settings. Channels differ from country to