Equipment Installation - GNATUS ENDUS Manual Del Propietário

EQUIPMENT INSTALLATION

Fig.01
A
Fig.02
C
ALWAYS HOLD THE CONNECTORS TO CONNECT OR DISCONNECT THE
CABLES.
To use the equipment you should
proceed with the installation of the
B
batteries. The batteries compartment
i s l ocated o n the b ack o f t he
equipment (Fig.01).
Remove the back cover (A) and insert
the 5 batteries AAA 1,5V (B).
Plug in the measurement cable (C) on
the equipment, connect the other
extremities of the cable to the file
support (D) and to the labial clip (E),
according to (Fig.02).
Warning: Check that the plug is firmly
connected to the inlet. The wrong
connection can interfere with the
correct measurement.
Turn on the equipment (F) to certify
that the installation was conducted
correctly.
D
E
40
F