Whitehaven Fan Installation Instructions
CARE AND CLEANING:
Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth
to avoid scratching the paint finish. Please turn off electricity power when you do so.
Do not immerse your ceiling fan in the water. It could damage the motor or the blades and create the
possibility of an electrical shock.
Ensure that the fitting does not come in contact with any organic solvents or cleaners.
To clean the fan blade, wipe with only a damp clean cloth with NO organic solvents or cleaners.
The motor has a permanently lubricated ball bearing so there is no need to oil.
NOTE: Always turn OFF the power at the mains switch before attempting to clean your fan.
FAN models
56 " FAN without light
56 " FAN with light
IN AUSTRALIA / NEW ZEALAND – Please refer to the separate WARRANTY STATEMENT.
IN EUROPE – If you are a European customer please contact the retail outlet where the fan was purchased
for warranty service.
11 | P a g e
TECHNICAL INFORMATION
Rated power
Rated Voltage
220-240VAC
220-240VAC
WARRANTY INFORMATION
Rated Power
(motor)
(Lamp)
35W
35W
GX53, 23W
Battery for remote
N/A
3V, CR2032
3V, CR2032