Amibot Pulse Manual De Usuario página 12

Product Operation
Starting Up / Standby / Sleeping
Starting Up
a. Keep pressing the power switch at the right side of the robot for more than 3
seconds.
b. Press on main body or ON/OFF on remote control to start cleaning.
Note : If robot is in sleeping mode, press
control to wake up the robot from sleeping mode, then press
start cleaning automatically.
Standby
Standby means the robot be with power switch on, wait for users operation. It can be
changed to standby mode by below methods:
a. During robot cleaning, press
E 'XULQJ URERW FOHDQLQJ SUHVV 212) EXWWRQ RQ UHPRWH FRQWURO WR SRZHU R
robot.
Sleeping
In sleeping mode, the robot can only be waken up from
ON/OFF on remote control in order to save power. To turn robot into sleeping mode
from standby mode:
a. Keep pressing
b. Robot will automatically enter sleeping mode if there is command received for more
than 60 seconds.
on main body to enter standby mode.
on main body for 3 seconds.
on main body or ON/OFF on remote
10
again, the robot will
button on main body or
WKH