Pla401 V2 - Zyxel PLA401 v2 Guia De Inicio Rapido

2 Connect the PLA401 v2 to a
Computer
1 Use an Ethernet cable to connect the ETHERNET port on
the PLA401 v2 to the Ethernet port on your computer.
2 Plug the PLA401 v2 into a power outlet.
3 The power (
( ) LED should be on or blinking.
4 When the PLA401 v2 detects a connection to another
PLA401 v2 (or another HomePlug AV compatible
powerline adapter), the HomePlug (
blink when there is traffic.
If you are having trouble setting up your connections, make
sure:
• Your outlets are working properly. Unplug the PLA401 v2 and
plug in another electrical appliance that you know works.
• The Ethernet cables you are using are Category 5 or higher.
Most cables are labeled with their specifications.
• All Ethernet cables are securely connected.
ENGLISH
) LED should be on and the Ethernet
4
) LEDs turn on and