Preparing The Machine; Sewing Speed; Assembling The Thread Stand; Thread Cones - Merrylock 740 DS Manual De Instrucciones

Tabla de contenido

Publicidad

B
A
0
0
OFF
O
ON
I

Preparing the machine

Attaching the foot control
Plug foot control into machine socket (A)
and then into main socket (B).

Sewing speed

The sewing speed can be adjusted by
increasing or decreasing the pressure
on the foot control (C).

Assembling the thread stand

Raise the support rod fully, turning slightly
until the positioning catches engage.

Thread cones

The anti-vibration cone should be used with the
wider edge to the bottom on the spool holder
pin when sewing with cones.
When using household spools remove the
anti-vibration cones.
Place spool on spool holder pins and push
the spool caps on.
If threads slip and get twisted, cover the spools
with the nets supplied in the accessory box.

Power/light switch

The power switch is conveniently placed on the
handwheel side of the machine.
"I" - ON
"O"-OFF
11

Publicidad

Tabla de contenido
loading

Tabla de contenido