Control Panel - HP DESKJET 3070A Serie Manual De Instrucciones

Control panel

1 Back: Returns to the previous screen.
Cancel: Stops the current operation, restores default settings.
2
Setup: Opens the Setup menu where you can check estimated ink levels, change Auto Power-Off setting, perform
3
maintenance tasks, and set language and region settings.
4 Selection buttons: Use buttons to select menu items on the printer display.
Wireless status light and button: Blue light indicates wireless connection. Blinking light indicates that wireless is
5
on, but the printer is not connected to a network. Pressing button opens wireless menu. Use the wireless menu
to print network configuration and test pages, view wireless signal strength, establish a Wi-Fi Protected Setup
(WPS) connection, and more.
ePrint light and button: White light indicates ePrint is connected. ePrint allows you to send images or documents
6
through an email address to the printer.
7 On button
ePrint
ePrint is a free HP service that provides a safe and easy way to print by sending an email to your printer's email address.
If you can send an email, you can use ePrint!
• To use ePrint your printer must be connected to the internet on a wired or wireless network.
• If you did not enable ePrint when you first installed your printer software, press the ePrint button on the control panel
to enable ePrint, and then follow the instructions on the printer display.
• When you enable ePrint you will need to agree to the terms of use for web services. See the document "TERMS AND
CONDITIONS for HP ePRINT, Print apps and ePrintCenter for HP web-connected printers" included in the printer box
and on the web at www.hp.com/go/ePrintCenter.
• If you have enabled ePrint, press the ePrint button on the control panel to view your printer email address, ePrint
status, check and manage product updates, and more.
• Go to www.hp.com/go/ePrintCenter to learn more about ePrint and register your printer.
Wireless
ePrint
2
7