Start Up - Truper LAVA-2000T Manual Del Usuario

Turning On
1. Open the water faucet and keep it open all the time you are using the washer. Maximum inlet pressure: 87 PSI
2. Connect the plug into the power supply.
3. Tighten and hold the high-pressure gun trigger to release the air caught inside the washer. Release the trigger when
the water flow is constant.
4. Turn the switch into the ON position. The motor will start momentarily and then it will stop.
1 2
• Turbo Spray Nozzle:
High-pressure spraying pattern for
an optimal cleansing. Keep the
nozzle at 8" minimum distance from
the surface to wash.
• Multiple Nozzle:
Turn the nozzle head to regulate
spray pressure and angle. Release
the gun nozzle to stop the water
flow before regulating the nozzle.
8
ENGLISH
Spraying
• Always hold the gun and lance with both
hands to control the sudden movement
produced by the pressurized water.
• Aim the lance towards the floor and press
the gun trigger to start spraying.
• To stop spraying, release the trigger.
Nozzles
Sart Up
3 4
• Angle Spray Nozzle:
To spray hard to reach places.
• Detergent Dispenser Nozzle:
Turn the nozzle dispenser
clockwise and fill up with a
detergent product. Turn the
nozzle counterclockwise to
adjust it to the dispenser. The
detergent will mix with water
automatically. Use the upper
knob to dose detergent.