Procedure For Checking Maximum Concentration; Disposal Requirements; Unit Specifications; Technical Specifications - Daikin VRV III REYAQ10P7Y1B Manual De Instalación

17.3. Procedure for checking maximum concentration

Check the maximum concentration level in accordance with steps 1
to 4 below and take whatever action is necessary to comply.
1 Calculate the amount of refrigerant (kg) charged to each system
separately.
+
amount of additional charging
refrigerant in a amount (amount of
single unit system refrigerant added
(amount of locally in
refrigerant with accordance with
which the system the length or
is charged before diameter of the
leaving the factory) refrigerant piping)
2 Calculate the volume of the room (m
installed.
3 Calculating the refrigerant density using the results of the
calculations in steps 1 and 2 above.
total volume of
≤
refrigerant in the
refrigerant system
3
size (m ) of room in
which indoor unit is
installed
If the result of the above calculation exceeds the maximum
concentration level, a ventilation opening to the adjacent room
shall be made.
Calculate the refrigerant density taking the volume of the room
where the indoor unit is installed and the adjacent room.
Install ventilation openings in the door of adjacent rooms until
the refrigerant density
concentration level.
18. D
ISPOSAL REQUIREMENTS
Dismantling of the unit, treatment of the refrigerant, of oil and of other
parts must be done in accordance with relevant local and national
legislation.
REYAQ10~16P7Y1B
VRVIII system outdoor unit
4PW62582-1A – 08.2011
=
total amount of
refrigerant (kg) in
the system
3
) where the indoor unit is
maximum concentration level
3
(kg/m )
is smaller than the maximum
19. U
NIT SPECIFICATIONS
Technical specifications
REYAQ 10
Casing material
Dimensions (hxwxd) (mm)
Weight (kg) 331
Operation range
• Cooling (min./max.) (°C)
• Heating (min./max.) (°C)
• Domestic hot water (°C)
(min./max.)
Refrigerant type
Refrigerant oil
Piping connection
• Liquid (mm) 9.52
• Suction (mm) 22.2
• HP/LP (mm) 19.1
Electrical specifications
REYAQ 10
Phase
Frequency
(Hz)
Voltage (V)
Voltage range
• Minimum (V)
• Maximum (V)
Recommended fuses (A) 25
12 14 16
painted galvanised steel
1680x1300x765
331 339 339
–10/43
–20/20
–20/43
R410A
Daphne FVC68D
12.7 12.7 12.7
28.6 28.6 28.6
19.1 22.2 22.2
12 14 16
3N~
50
380~415
342
440
25 40 40
Installation manual
30