Recording - Denon CDR-1000 Instrucciones De Operación

ENGLISH
(3) Names and Functions of Remote Control Unit Buttons
Buttons without descriptions have the same function as those on the main unit.
See "PART NAMES AND FUNCTIONS" on Page 8.
Scan button (SCAN)
• Plays/program plays the first 10
seconds of each track.
Repeat button (REPEAT)
Number/alphabet buttons (0 ~ 9)
• Selects a track by number.
• For 2-digit track numbers, press the
buttons in rapid succession.
• Selects character for text input.
Track mark button
(TRACK MARK)
• Increases track numbers during
recording. (Only Manual Rec mode).
Automatic search reverse
button ( 8 )
• Current track (Play and Program mode).
Manual search reverse button
( )
6
10
Program button (PROGRAM)
On/Standby button (ON/STANDBY)
• Switches to Standby/On.
Shuffle button (SHUFFLE)
Scroll button (SCROLL)
ON /STANDBY
SCAN
REPEAT PROGRAM SHUFFLE
Automatic search forward
button ( )
9
ABC DEF GHI
1 2 3
• Next track (Play and Program mode).
JKL MN OPQ
4 5 6
RST UVW XYZ
Play button ( PLAY)
1
7 8 9
SPACE
TRACK MARK SCROLL
• Starts play.
0
PLAY
Manual search forward button
STOP
( )
7
PAUSE
STORE / CANCEL/
MENU ENTER DELETE
Stop button (
2
REMOTE CONTROL UNIT RC-276
Pause button (
3
• Interrupts play/recording.
Cancel/Delete button
(CANCEL/DELETE)
Enter button (ENTER)
Store/Menu button
(STORE/MENU)
(4) Inserting Discs
q Press the OPEN/CLOSE button (
• "OPEN" lights up.
w Insert a CD, CD-R or CD-RW in the appropriate recess in
the tray, label side up.
e Press the OPEN/CLOSE button (
• "CLOSE" lights up, followed by "READING" and the
display will show the type of disc you inserted.
• If you insert a blank or partly-recorded CD-R or
unfinalized CD-RW, the CD recorder will calibrate the
disc for optimum recording. During this process the
display will first show "INITIALIZING" and then the
number of audio tracks. Calibration can take up to 40
seconds.
• If a CD-R/RW is finalized it will show "CD" on the
display.
• If CD-text is available the TITLE/ARTIST will scroll by.
NOTES:
• If your finger should get caught in the disc tray when it closes, press the OPEN/CLOSE button (
• Only Audio CDs will be accepted. If a non-audio disc is inserted, the display shows "WRONG DISC".
• For recording it is important that the blank disc is completely free from dust particles or scratches. See "Disc cleaning" on
page 6.
9

RECORDING

Remarks About Recording
• To assure accurate recording, record with an ambient temperature of 30°C or less.
• Recording may stop if the unit is subject to shocks during recording. If recording stops, it may no longer be possible to use the
disc normally. ("DISC ERROR")
STOP)
Recording Modes
Your recorder offers several recording modes.
Pressing the REC MODE button will switch the recording mode as described below.
PAUSE)
RECORD DISC
ª
RECORD TRACK
ª
REC MANUAL
ª
MAKE CD
Some remarks on recording:
• When Auto track is ON (default setting), track numbers will automatically be increased during recording.
• By programming the source first, a compilation can be recorded.
• If a finalized CD-R disc is inserted in the CD recorder, "FINALIZED CD" will be displayed when the REC MODE button is
pressed. Recording is not possible.
• If a finalized CD-RW disc is inserted in the CD recorder, "UNFINALIZE" and "PRESS ENTER" will be dis-played when the REC
MODE button is pressed. If ENTER button is pressed, the disc will be unfinalized.
) to open the disc tray.
5
) to close the tray.
5
B
Recess
Disc tray
• To make a synchronized recording of the complete disc or a program simply by
starting the source.
• To make a synchronized recording of a single track simply by starting the source.
• To manually start a recording simply by pressing the REC button.
• To make a synchronized recording of the complete disc or a program simply by
starting the source. Finalizing will be done automatically.
NOTE:
• Analog recording is not possible in the Make CD mode.
OPEN/CLOSE button ( )
5
REM
REC
TIME
1
2 4 3
OPTI CAL 5 6
I 8 7 TRAC
9 10 K TIME
CD 11
RW
R L
MAN
UAL
SYN C
).
5