Ricatech RR3100 Manual Del Usuario página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5. Press STOP /
to stop playback.
PROGRAMMING TRACKS
You may store up to 20 tracks in the desired sequence.
1. In the stop position, press PROGRAM /
Icon ―MEMORY‖ and P0-01 start flashing.
2. Press FF /
or FB /
number appears in the display. For MP3:
press PRESET + /
3. Press PROGRAM /
4. Repeat step 2-3 to select and store all desired tracks. FULL is displayed if you attempt to
program more than 20 tracks
5. Press PLAY/PAUSE /
Erasing the program
You can erase the contents of the memory by:
-
once if in stop position, twice during playback;
-
Press POWER /
-
Select another sound source
-
Open the CD door
RECORDING
From CD to SD/USB
The system is capable to convert whole CD disc to MP3 format and copy to USB mass storage device or SD card. And also
have the ability to copy one single MP3 track to and from on USB/SD card.
1. In CD playback mode, press REC /
playback will be stopped and skipped back to the beginning of current track, system will scan the contents of USB/SD
card and create folder to store MP3 track. Resume CD playback and start ripping from the moment. The corresponding
target device icon ― USB ‖ / ― CARD ― start flashing.
2. Press STOP /
to exit CD ripping.
MP3 copying
1. In CD-MP3, USB or SD card playback mode, press REC /
to SD card or vice versa. Playback will be stopped and system will scan the contents of USB/SD card and create
folder to store MP3 track.
2. icon ― REC displayed
3. Message COPY 01 will be displayed, the proportional copied percentage will be shown on the decimal number.
4. The target device icon ―USB‖ or ―CARD‖ start flashing, the decimal number will be increment from 01 as MP3 copying
starts, the process will stop as it reach 100
5. Current MP3 will be playback from beginning
to start programming.
once or repeatedly until the desired track
or PRESET – /
to select the desired album.
to confirm, display shown stored track no. and next store position.
to play the program.
to start ripping to USB/SD card (default USB if both device are detected),
to start MP3 copying from CD to USB/SD card, or USB

Publicidad

Tabla de contenido
loading

Tabla de contenido