Environmental Protection - Crown CT18189 Manual Original

the jammed accessory� Continue the operation with
the use of another accessory in order to release the
jammed one� Note: it is strictly prohibited to knock
out the jammed working accessories or to swing it
and to try to extract it with the use of foreign tools
or objects (pieces of pipe, winches, jacks, etc.).
Power tool maintenance / preventive
measures
Before carrying out any works on the power tool it
must be disconnected from the mains.
Power tool lubrication
• Add grease into the power tool after every 60 hours
of work, after every replacing the carbon brushes or in
case of a decrease in the impact power�
• To replace carbon brushes and add grease it is
recommended to contact CROWN service centre�
• Add the special grease from tube 12 (30g) into
the power tool� Attention: do not add grease more
than 30g; otherwise the power tool will be not
function properly. It is recommended that the
gears of power tools be greased with a special
lubricant for gears - other types of lubricants will
harm the power tool.
Cleaning of the power tool
An indispensable condition for a safe long-term exploi-
tation of the power tool is to keep it clean� Regularly
The manufacturer reserves the possibility to introduce changes.
flush the power tool with compressed air thought the
ventilation slots 4�
After-sales service and application service
Our after-sales service responds to your questions
concerning maintenance and repair of your product as
well as spare parts� Information about service centers,
parts diagrams and information about spare parts can
also be found under: www.crown-tools.com�
Transportation of the power tools
• Categorically not to drop any mechanical impact on
the packaging during transport�
• When unloading / loading is not allowed to use any
kind of technology that works on the principle of clamp-
ing packaging�

Environmental protection

Recycle raw materials instead of dispos-
ing as waste.
Power tool, accessories and packaging should
be sorted for environment-friendly recycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper man-
ufactured without chlorine�
English
23