Kohler Purist K-14435 Guia De Instalacion página 8

10. Install the Soap Dish
Start a setscrew into the post. Do not thread fully into the post.
If included, place an escutcheon on the wall plate.
NOTE: The escutcheon sits loosely until the post is in place and the
setscrew is tightened.
Align the soap dish assembly over the wall plate.
Tighten the setscrew with a hex wrench.
11. Install the Tumbler Holder
Start a setscrew into the post. Do not thread fully into the post.
If included, place an escutcheon on the wall plate.
NOTE: The escutcheon sits loosely until the post is in place and the
setscrew is tightened.
Align the tumbler holder assembly over the wall plate.
Tighten the setscrew with a hex wrench.
1020118-2-B 8 Kohler Co.