Safety Warnings; Personal Protective Equipment - DeVilbiss Viper SB-E-2-VPR Instrucciones De Empleo

SAFETY WARNINGS

Fire and explosion
Solvents and coating materials can
be highly flammable or combustible
when sprayed.
ALWAYS refer to the coating
material suppliers instructions and
COSHH sheets before using this
equipment.
Users must comply with all local
and national codes of practice and
insurance company requirements
governing ventilation, fire precautions,
operation and house-keeping of working
areas.
This equipment, as supplied, is NOT
suitable for use with Halogenated
Hydrocarbons.
Static Electricity can be generated
by fluid and/or air passing through
hoses, by the spraying process
and by cleaning nonconductive parts
with cloths. To prevent ignition sources
from static discharges, earth continuity
must be maintained to the spray gun
and other metallic equipment used. It is
essential to use conductive air and/or
fluid hoses.
Personal Protective
Equipment
Toxic vapours
certain materials may be
poisonous, create irritation or be
otherwise harmful to health.
Always read all labels and safety
data sheets for the material before
spraying and follow any
recommendations.
If In Doubt, Contact Your Material
Supplier.
SB-E-2-VPR
When sprayed,
10/38
Operator s manual
The use of respiratory protective
equipment is recommended at all
times. The type of equipment must
be compatible with the material
being sprayed.
Always wear eye protection when
spraying or cleaning the spray gun.
Gloves must be worn when
spraying or cleaning the
equipment.
Training - Personnel should be given
adequate training in the safe use of
spraying equipment.
Misuse
Never aim a spray gun at any part of
the body.
Never exceed the max. recommended
safe working pressure for the
equipment.
The fitting of non-recommended or non
original spares may create hazards.
Before cleaning or maintenance, all
pressure must be isolated and relieved
from the equipment
The product should be cleaned using a
gun washing machine. However, this
equipment should not be left inside gun
washing machines for prolonged periods
of time.
Noise Levels
The A-weighted sound level of spray
guns may exceed 85 dB (A) depending
on the set-up being used. Details of
actual noise levels are available on
request. It is recommended that ear
protection is worn at all times when
spraying.
Operating
Spray Equipment using high pressures
may be subject to recoil forces
Under certain circumstances, such
forces could result in repetitive strain
injury to the operator