Materials Of Construction; Possible Combinations - DeVilbiss Viper SB-E-2-VPR Instrucciones De Empleo

CHARACTERISTICS
Automatic Spray gun for enamel application designed to give you the
optimal production performance. This spray gun is answering the needs of
the sanitary application, table ware and decorative application, pavement,
tiles, electric domestic appliances and all others ceramic activities.
The patent pending Quick Up ring will give you an easy and quick
dissembling of the air cap and the tip. The patent pending bellows seal will
give your needle long life.
The needle adjustment knob has 18 ratchet positions, allows fine and
accurate fluid flow control.

Materials of construction

Gun body
Tip
Needle
Spray head
Specifications
Fluid inlet P
Fluid Recirculation P
Air inlet (Atom+Fan) A
Cylinder/trigger Cyl
Maximum air pressure Atom and Fan
Minimum to Maximum air pressure for
cylinder operation
Maximum fluid pressure
Maximum temperature in use
Spray gun weight
Air consumption

Possible combinations

Fluid Tip
1.2
1.4
1.6
1.8
2.0
2.2
2.8
Model Part Number
VPR-E31-18
SB-E-2-VPR
Aluminium hard anodizing
Stainless steel hardened (Core HRC 58)
Stainless steel, special PU or stainless steel point,
hardened to HRC 58
Stainless steel
F
E31
E63
E70
Needle
PU point Steel point
X X
X X
X X
X X
X X
X
X
Tip Ø = 1.8 mm
Air cap number
Spray gun type
11/38
Operator s manual
1/4 BSP
1/4 BSP
1/4 BSP
1/8 BSP
7 Bars
4 Bars to 7 bars
7 Bars
40° C
620 gr
340l/mn at 2.5 bar
450l/mn at 3.5 bar
540l/mn at 4 bar
Air Cap
E63 E70
X
X
X
X
E31
X
X
X
X
X