HP Photosmart M22 Guía De Comienzo Rápido página 20

EastwoodQSG.fm Page 18 Thursday, December 23, 2004 3:58 PM
3. Without turning off the camera, connect it to your
computer again using the same procedure you used in
the previous section, Transfer Images to a Computer.
4. The next step is slightly different on a Windows and
Macintosh computer:
• Windows: Connecting the camera to the computer
activates the HP Instant Share Setup program. If some
other dialog box appears, close that dialog box by
clicking Cancel. In the HP Instant Share Setup
program, click Start, then follow the on-screen
instructions to set up destinations on the computer and
save them to your camera.
• Macintosh: Connecting the camera to the computer
activates the HP Instant Share Setup Assistant. Click
Continue, then follow the on-screen instructions to set
up destinations on the computer and save them to your
camera.
5. Disconnect the camera from the computer, then go back
to the HP Instant Share Menu to check that the new
destinations are now in the camera. You can now mark
images in the camera to be sent to one or more of these
HP Instant Share destinations. See the section titled
Sending Images to Destinations in Chapter 4 of the
camera User's Manual for details about how to do this.
To learn how to view the User's Manual on the HP Image
Zone CD, see the next page of this Quick Start Guide.
18 HP Photosmart M22/M23 Quick Start Guide